List of AV Equipment in this Computer Lab
- 24 Computers for students
- 1 Instructor computer
- Large format plotter
- WallTalker Dryerase Projection Surface
- Data Projector
To Project the Computer
Turn ON the projector with the projector remote control. If you don't see the computer image projected after the projector has warmed up try pressing the Input button on the projector remote control and select Computer. Also the laptop switch button should be steady and not flashing.
If it is flashing (laptop mode) press the button till it is not flashing. For sound make sure the amplifier (below the Computer) power is on, the master volume turned up to @ 7, and the volume control labeled Computer is turned up. You may also need to adjust the volume controls on the computer.
To turn off the projector press the power button once and then again to confirm.
Connecting a Laptop
By the computer monitor there is a spare male 15 pin (VGA) connector that plugs into the laptop. Turn ON the projector with the remote control kept by the computer. Press the input button on the projector remote and select Computer.
Locate the Laptop switch button also by the monitor and press it till it is flashing (Laptop mode.)
For laptop sound connect the spare audio cable by the monitor into the laptop headphone connection. Make sure the amplifier (by the computer) power is on, the master volume turned up to @ 7, and the volume control labeled laptop is turned up. You may also need to adjust the volume controls on the laptop. To turn off the projector press the power button once and then again to confirm.
Call 970-247-7444 or Email AskIT@fortlewis.edu
Technical Emergency? 970-749-8191