Welcome to Smart classroom Theater 105

Image of Theater 105 classroom

Features of this Classroom

  • 30 seats
  • Data Projector
  • Computer (will also play DVD's)
  • VHS / DVD Combo Player

To Project a Video
Turn ON the projector with the control box located behind the monitor. On the control box press the input button, then press the up or down button to navagate to video and press select on the control box.  Next you will need to press the power button on the VHS / DVD combo unit or on combo player remote. On the VHS / DVD press and select VHS. Insert VHS tape and press play on combo unit or on combo player remote. For sound make sure the amplifier (below the Computer) power is on, the master volume turned up to @ 7, and the volume control labeled VCR/DVD is turned up. 
To turn off the projector press the power button once and then again to confirm.

To Project the Computer
Turn ON the projector with the control box located behind the monitor. You may also need to adjust the volume controls on the computer. If you don't see the computer image projected after the projector has warmed up try pressing the computer button on the remote control. For sound make sure the amplifier (below the Computer) power is on, the master volume turned up to @ 7, and the volume control labeled Computer is turned up.
To turn off the projector press the power button once and then again to confirm.

Projecting a DVD
Turn ON the projector with the control box located behind the monitor. After logging onto the computer insert the DVD into the Disc drive and Choose from the list of DVD player programs. If you don't see the computer image projected after the projector has warmed up try pressing the computer button on the remote control. For sound make sure the amplifier (below the Computer) power is on, the master volume turned up to @ 7, and the volume control labeled Computer is turned up. 
To turn off the projector press the power button once and then again to confirm.

Connecting a Laptop
Behind the computer there is a little black box containing spare male 15 pin connector along with a laptop switch and other cords that plugs into the laptop. Turn ON the projector with the control box located behind the monitor.  After the projector warms up press the red button on the laptop switch cord, make sure red button is blinking. This indicated that the laptop input is selected. Turn ON the projector with the control box located behind the monitor.  If the projector does not display the laptop make sure your laptop is in the apropriate settings in properties. Make sure that the projector is selected to comp 2 and not comp 1 by pressing the computer button on the remotecontrol next to the computer. For sound make sure the amplifier (below the computer monitor) power is on, the master volume turned up to @ 7, and the volume control labeled Laptop is turned up. You may also need to adjust the volume controls on the laptop.
To turn off the projector press the power button once and then again to confirm.

Need Help?

Call 970-247-7444 or Email AskIT@fortlewis.edu

Technical Emergency? 970-749-8191